Skip to content
Lewisbands Walk-In TubsConyers walk-in tubs and safer bathing help
Step in, not over

Walk-In Showers for Safer Everyday Bathing

Request an estimate today

A walk-in shower removes the tall wall you step over to reach the water. That one change cuts a common fall risk. Many homeowners in the Conyers area choose one after a slip, a close call, or a doctor's warning. Others plan ahead.

Lewisbands Walk-In Tubs is a referral service. We do not install showers. We explain the steps in plain words, then connect you with an independent provider in our network. The provider visits, measures, checks the floor and walls, and gives you a written quote. You can compare, ask questions, and decide with no obligation. This page covers styles, features, timing, and what older houses can hide.

Why the first slip is a signal

Most people wait for a scare. A slip on wet tile. A hand grabbing a towel bar that was never made to hold weight. That moment tells you something. Soap, water, and a tall tub wall are a risky mix.

Step in, not over. A walk-in shower takes away the tall wall. It gives you a flat, dry spot to stand.

What a walk-in shower is

It is a shower with a low entry. There is no tub wall to climb. Many include a built-in seat, grab bars, and a hand-held spray head.

People also call a wider, roomier version a handicap accessible shower. It leaves space for a walker or a wheelchair. For many older adults, it is the heart of a safe bathing conversion.

Low threshold or curbless

There are two main styles.

  • Low threshold: A short lip, often a few inches high, keeps water inside. It is simpler to build in most bathrooms.
  • Curbless: The floor slopes gently to the drain. There is no lip at all. It works well for wheelchairs and walkers.

Curbless builds often need floor work. The floor must slope toward the drain. On a slab, that can mean cutting concrete. Over a crawl space, a provider may rework the floor framing. Ask which style fits your room.

Features worth a look

Pick features for the person who will use the shower, not for a catalog photo.

  • Grab bars set into solid wood. Providers add boards inside the wall, called blocking, so the bars hold.
  • A fold-down or built-in seat.
  • A hand-held spray head on a slide bar.
  • A non-slip floor surface.
  • An anti-scald valve. It keeps hot water from jumping to a painful level.
  • A wide opening and good lighting.

Prefab walls or tile

Prefab means factory-made panels or a one-piece kit. It has fewer seams and goes in faster. Tile is built on site. It lets you choose colors and shapes, but it takes longer and has more grout to clean.

Both can be safe and good-looking. The right choice depends on your budget, your schedule, and how much cleaning you want to do.

Older homes: look under the tub

The old tub can hide a lot. In mill-era houses, a provider may find rusted steel supply pipes, worn cast-iron drains, or layers of old flooring. A slow leak can soak a subfloor for months before anyone sees it. Hot, humid summers make that worse, especially over a crawl space.

Look under the tub before you settle on a price. A good provider checks the floor, the walls, and the pipes at the start. A surprise on day two costs more time than a check on day zero.

Plan before the fall, and plan for the surprise too.

Get Started

What the work looks like, day by day

Every house is different. Here is a common path.

  • Before day one: The provider measures, you pick a style, and parts get ordered.
  • Day one: The old tub or shower comes out. The crew checks the floor and walls.
  • Day two: Repairs, plumbing changes, the drain, and waterproofing.
  • Middle days: Wall panels or tile, the base, and the door or curtain rod.
  • Last day: Fixtures, seals, and a leak test.

How long does it take?

Many prefab jobs take about three to seven working days once work starts. Tile often takes one to two weeks or more. Repairs found behind the walls add days. Ordering parts can take several weeks, so the wait before the work may be longer than the work itself.

You will not have a working shower during the job. Make a plan for washing at a relative's home, a gym, or with a sponge bath.

What waiting can cost

Time changes the outcome. Each wet, tall step over a tub wall is another chance to fall. A hidden leak keeps soaking wood while you wait. Soft wood and mold get worse with time, and a small repair can become a large one.

You do not have to rush a choice. But a request for an estimate starts the clock on parts and scheduling, and it costs nothing to ask questions.

Keeping it clean and comfortable

A few habits keep a shower fresh.

  • Wipe or squeegee the walls after use.
  • Run the vent fan during and after a shower, since humid summers feed mildew.
  • Use a mild cleaner. Harsh ones can dull the surface.
  • Reseal tile grout as the provider advises.

For comfort, ask about a seat that stays warm to the touch, and keep towels within easy reach.

Planning around the person

Start with how the person moves. Can they lift a leg? Do they use a cane, walker, or chair? Will a helper stand nearby? These answers shape the door width, the seat, and the floor.

A doctor or occupational therapist can give useful advice. Plan for needs that may change over the next few years, not only today.

Questions to ask the provider

  • What will you check under the old tub before pricing?
  • Is the quote in writing, with parts and labor listed?
  • Who handles permits, if any are needed?
  • How long until the shower works again?
  • What happens if you find rot or old pipes?
  • How do I care for the finish?

Request a callback to check provider availability in your area.

Get Started

What's Included

Low-Step Entry Planning

The provider helps you choose a low threshold or curbless entry that suits your bathroom and your body.

Grab Bar Placement

Bars go into solid backing so they hold your weight when you need them.

Seat and Spray Options

Built-in or fold-down seats, plus hand-held spray heads, make sitting and rinsing easier and calmer.

Written Quote Review

A local provider lists parts, labor, and possible repairs in writing so you can compare before you decide.

Typical Walk-In Shower Costs

Prices vary by bathroom size, style, and what is hiding behind the walls. These are typical U.S. ranges, not quotes. Older houses often cost more because of repairs. Ask each provider for a written quote that lists every part of the job.

ItemTypical rangeNotes
Prefab walk-in shower, installed$3,000 – $8,000Faster build, fewer seams
Tiled walk-in shower$6,000 – $15,000More custom, longer job
Curbless shower with sloped floor$8,000 – $20,000Floor work raises the price
Grab bars and shower seat$150 – $900Depends on type and backing
Subfloor or wall repair$500 – $4,000Common in older homes
Plumbing updates$300 – $3,000Old pipes or moved drains

Get Started

How It Works

Request an Estimate

Tell us about your bathroom and who will use the shower. It takes only a few minutes.

Get Matched Locally

Lewisbands Walk-In Tubs connects you with a provider in our network who serves your area.

Provider Visit and Quote

The provider measures, checks the floor, and gives you a written quote.

Schedule and Install

You pick a date. The provider orders parts, does the work, and tests it.

Why Call Lewisbands Walk-In Tubs

Plain, Step-by-Step Guidance

We explain each stage in short words, so you know what happens first and what comes next.

Independent Local Providers

Providers in our network do the work. They are separate businesses that know local homes.

Older-Home Awareness

We stress checking floors, pipes, and walls early, before surprises slow the job.

No Pressure

Request an estimate with no obligation, then compare quotes at your own pace.

Other Services

Need walk-in showers in Conyers?

Tell us about your bathroom and what worries you. Request an estimate, and Lewisbands Walk-In Tubs will connect you with an independent provider in our network. No obligation.

No obligation
Questions

Walk-In Showers FAQ

  1. How much does a walk-in shower cost?

    Typical U.S. prices run from about $3,000 for a simple prefab unit to $20,000 or more for a custom curbless build. Repairs behind the walls can add to the total, so get a written quote.

  2. How long does it take to install a walk-in shower?

    Many prefab jobs take about three to seven working days once work begins. Tile takes longer. Ordering parts and fixing hidden damage can add time.

  3. Is a walk-in shower better than a walk-in tub?

    It depends. A walk-in shower suits people who prefer standing or sitting on a seat. A walk-in tub suits people who want to soak. A provider can help you compare.

Contact

Tell us what happened

Tell us about your bathroom and what worries you. Request an estimate, and Lewisbands Walk-In Tubs will connect you with an independent provider in our network. No obligation.

No obligation
Request a callback